含10-甲基丙烯酰氧癸二氢磷酸酯粘接剂对氧化锆陶瓷与树脂水门汀粘接强度和边缘封闭的影响

刘芳; 谢小飞; 张容秀; 徐丽; 高益林; 李建成

doi:10.16766/j.cnki.issn.1674-4152.002492

含10-甲基丙烯酰氧癸二氢磷酸酯粘接剂对氧化锆陶瓷与树脂水门汀粘接强度和边缘封闭的影响

doi: 10.16766/j.cnki.issn.1674-4152.002492

蚌埠医学院第一附属医院口腔科，安徽蚌埠 233004

基金项目:

安徽高校合作攻关和公共卫生协同创新项目 GXXT-2020-021

蚌埠医学院自然科学重点项目 BYKY2019019ZD

蚌埠医学院自然科学基金面上项目 BYKY18106

详细信息

通讯作者:
李建成, E-mail: 79185917@qq.com

中图分类号: R781.05R783
计量
- 文章访问数: 163
- HTML全文浏览量: 78
- PDF下载量: 2
- 被引次数: 0
出版历程
- 收稿日期: 2021-05-23
- 网络出版日期: 2022-09-21

Effects of 10-methacryloxy decyldihydrogen phosphate-conditioned adhesive in improving the bonding strength and marginal sealing of zirconia ceramics and resin

Department of Stomatology, the First Affiliated Hospital of Bengbu Medical College, Bengbu, Anhui 233004, China

摘要

摘要: 目的研究含10-甲基丙烯酰氧癸二氢磷酸酯(MDP)的粘接剂对提高氧化锆陶瓷和树脂水门汀之间的粘接性和密封性的影响。方法本研究分为体外实验和临床实验两部分。体外测试制作80块氧化锆陶瓷试件，采用随机数字表法分为2组，每组40个试件，其中常规组试件喷砂后直接将氧化锆陶瓷和树脂水门汀粘接，实验组试件喷砂后则使用含有MDP的粘接剂处理后再和树脂水门汀粘接。选择2018年1—12月于蚌埠医学院第一附属医院口腔科完成下颌第一磨牙根管治疗后行氧化锆陶瓷全冠修复治疗的80例患者，采取随机数字表法将其分为常规组和实验组，每组40例，临床操作和体外测试方法一致。体外实验比较2组试件粘接强度、边缘封闭性，临床实验比较患者满意度。结果冷热循环前，实验组试件粘接强度[(20.35±0.59)MPa]明显大于常规组[(16.03±0.51)MPa，P＜0.01]；冷热循环处理后，实验组与常规组试件粘接强度均有明显下降(P＜0.01)，但实验组下降幅度小于常规组。通过甲基蓝溶液处理后，实验组试件断面渗漏程度[(0.63±0.01)μm]显著小于常规组[(1.34±0.02)μm，P＜0.01]。实验组患者总满意率(90.00%)高于常规组(72.50%，P＜0.05)。结论氧化锆陶瓷和树脂水门汀粘接时使用含MDP的粘接剂可有效提升粘接强度，增强粘接边缘密封性，从而提高氧化锆陶瓷使用寿命以及患者粘接满意度，具有广泛的临床应用价值。
- 10-甲基丙烯酰氧癸二氢磷酸酯 /
- 氧化锆陶瓷 /
- 树脂水门汀 /
- 粘接强度 /
- 边缘封闭
Abstract: Objective To evaluate the effects of 10-methacryloxy decyldihydrogen phosphate (MDP)-conditioned adhesive in improving the bonding strength and marginal sealing of zirconia ceramics and resins. Methods This study consisted of in vitro and clinical trials. Eighty zirconia ceramic specimens were prepared by in vitro test, and randomly divided into two groups with 40 specimens in each group. The conventional group received the direct adhesion of zirconia ceramics with resin, while the test group received the adhesion of zirconia ceramics under MDP-conditioned zirconia with resin. Eighty patients whose mandibular first molar treated with zirconia all-ceramic crowns after root canal therapy in our hospital were selected as research subjects. According to the random number table method, the patients were assigned to two groups, with 40 cases in each group. The clinical operation was consistent with the in vitro test method. The bonding strength, marginal sealing in vitro and patient's satisfaction from clinical trials were compared. Results Before thermocycling treatment, the bonding strength in the test group [(20.35±0.59) MPa] was significantly higher than that in the conventional group [(16.03±0.51) MPa, P < 0.01]. The bonding strength in the two groups significantly decreased after thermocycling treatment (P < 0.01), whereas the descending degree of the bonding strength in the test group was lower than that in the conventional group. After treatment with methyl blue solution, the leakage of fault surface in the test group [(0.63±0.01) μm] was clearly lower than that in the conventional group [(1.34±0.02) μm, P < 0.01]. The overall satisfaction in the test group (90.00%) was markedly higher than that in the conventional group (72.50%, P < 0.05). Conclusion The MDP-conditioned zirconia can improve the bonding strength and marginal sealing of zirconia ceramics and resin, extend the application time of zirconia ceramics and increase patients' satisfaction. It is recommended to be used in clinical practice.
- 10-Methacryloxy decyldihydrogen phosphate /
- Zirconia ceramics /
- Resin /
- Bonding strength /
- Marginal sealing

HTML全文

表 1 2组下颌第一磨牙根管治疗后行全冠修复治疗的患者基线数据比较

Table 1. Comparison of baseline data between the two groups of patients who underwent total crown restoration after root canal treatment for mandibular first molars

组别	例数	性别(例)		年龄(x±s，岁)	根管治疗后修复时间(x±s，月)
组别	例数	男性	女性	年龄(x±s，岁)	根管治疗后修复时间(x±s，月)
常规组	40	29	11	62.31±4.43	7.86±1.45
实验组	40	28	12	63.25±5.27	8.34±2.39
统计量		0.061^a		0.864^b	1.086^b
P值		0.805		0.391	0.282
注：^a为χ²值，^b为t值。

下载: 导出CSV

表 2 2组试件冷热循环前后粘接强度比较(x±s，MPa)

Table 2. Comparison of bonding strength between the two groups of specimens before and after cold and hot cycling (x±s, MPa)

组别	样品个数	冷热循环前	冷热循环后	t值	P值
常规组	20	16.03±0.51	9.85±0.45	53.420	< 0.001
实验组	20	20.35±0.59	15.30±0.58	36.959	< 0.001
t值		24.773	33.202
P值		< 0.001	< 0.001

下载: 导出CSV

参考文献(20)

[1]	李轲, 郑适泽, 陈玥, 等. 树脂水门汀与氧化锆陶瓷剪切粘接强度的研究[J]. 中华口腔医学研究杂志(电子版), 2019, 13(4): 212-217. https://www.cnki.com.cn/Article/CJFDTOTAL-ZKQD201904004.htm LI K, ZHENG S Z, CHEN Y, et al. The shear bond strength between resin luting systems and zirconia[J]. Chinese Journal of Stomatological Research(Electronic Edition), 2019, 13(4): 212-217. https://www.cnki.com.cn/Article/CJFDTOTAL-ZKQD201904004.htm
[2]	葛鑫, 谢艳婷, 顾舒扬, 等. 经冷常压等离子体处理的纯钛与氧化锆陶瓷粘接强度的实验研究[J]. 中国实用口腔科杂志, 2019, 12(9): 532-537, 542. https://www.cnki.com.cn/Article/CJFDTOTAL-ZSKQ201909008.htm GE X, XIE Y T, GU S Y, et al. Experimental study on the bonding strength of pure titanium after treatment with cold atmospheric plasma to zirconia[J]. Chinese Journal of Practical Stomatology, 2019, 12(9): 532-537, 542. https://www.cnki.com.cn/Article/CJFDTOTAL-ZSKQ201909008.htm
[3]	袁硕, 陈志宇, 马晓平. 3种树脂粘接剂对氧化锆全瓷修复体和IPS e. max Press铸瓷颜色稳定性的影响[J]. 口腔医学研究, 2019, 35(8): 798-801. https://www.cnki.com.cn/Article/CJFDTOTAL-KQYZ201908028.htm YUAN S, CHEN Z Y, MA X P. Effect of three resin adhesives on color stability of IPS E. Max Press cast porcelain and zirconia all-ceramic restorations[J]. Journal of Oral Science Research, 2019, 35(8): 798-801. https://www.cnki.com.cn/Article/CJFDTOTAL-KQYZ201908028.htm
[4]	陈文丽, 谢小飞, 刘芳, 等. 根管治疗后高嵌体与纤维桩核冠修复后牙牙体缺损的临床疗效观察[J]. 中华全科医学, 2021, 19(5): 767-770. doi: 10.16766/j.cnki.issn.1674-4152.001912 CHEN W L, XIE X F, LIU F, et al. Clinical effect of onlay and fibre post-core crown in repairing tooth defect after root canal treatment[J]. Chinese Journal of General Practice, 2021, 19(5): 767-770. doi: 10.16766/j.cnki.issn.1674-4152.001912
[5]	姬雅琴. 数字化微笑设计+"TT"玉瓷全解剖式氧化锆全瓷冠对接受前牙及前磨牙固定义齿美学修复牙齿美学效果的影响[J]. 中国医疗美容, 2019, 9(9): 91-93. https://www.cnki.com.cn/Article/CJFDTOTAL-YLMR201909028.htm JI Y Q. Effect of digital smile design + "TT" jade porcelain all-anatomical zirconia all-porcelain crown on the aesthetic effect of the fixed denture of the receiving anterior teeth and premolars[J]. Chinese Medical Cosmetology, 2019, 9(9): 91-93. https://www.cnki.com.cn/Article/CJFDTOTAL-YLMR201909028.htm
[6]	LE M, LARSSON C, PAPIA E. Bond strength between MDP-based cement and translucent zirconia[J]. Dent Mater J, 2019, 38(3): 480-489. doi: 10.4012/dmj.2018-194
[7]	高为伟, 丁虹, 张红, 等. 不同清洁方法对二氧化锆陶瓷粘接强度的影响[J]. 实用口腔医学杂志, 2020, 36(6): 861-864. https://www.cnki.com.cn/Article/CJFDTOTAL-SYKQ202006004.htm GAO W W, DING H, ZHANG H, et al. The effects of different cleaning methods on shearing bonding strength of zirconia ceramics[J]. Journal of Practical Stomatology, 2020, 36(6): 861-864. https://www.cnki.com.cn/Article/CJFDTOTAL-SYKQ202006004.htm
[8]	AL-SHEHRI E Z, AL-ZAIN A O, SABRAH A H, et al. Effects of air-abrasion pressure on the resin bond strength to zirconia: A combined cyclic loading and thermocycling aging study[J]. Restor Dent Endod, 2017, 42(3): 206-215. doi: 10.5395/rde.2017.42.3.206
[9]	张晓, 姬洋, 刘宝盈, 等. 不同抛光工具对氧化锆抛光效果的比较研究[J]. 口腔医学研究, 2018, 34(11): 1240-1243. https://www.cnki.com.cn/Article/CJFDTOTAL-KQYZ201811032.htm ZHANG X, JI X, LIU B X, et al. Comparative Study on Polishing Effect of Zirconia by Different Polishing Tools[J]. Journal of Oral Science Research, 2018, 34(11): 1240-1243. https://www.cnki.com.cn/Article/CJFDTOTAL-KQYZ201811032.htm
[10]	胡乐. 树脂加强型玻璃离子与自粘接树脂型水门汀粘接剂对氧化锆全瓷冠粘接的作用分析[J]. 中国保健营养, 2019, 29(7): 269. HU L. Analysis of the bonding effect of resin-reinforced glass ion and self-adhesive resin cement on zirconia all-ceramic crowns[J]. China Health Care Nutrition, 2019, 29(7): 269.
[11]	张记. 口腔修复中应用二氧化锆修复体的咀嚼能力的影响及其应用效果观察[J]. 全科口腔医学电子杂志, 2019, 6(11): 71-72. https://www.cnki.com.cn/Article/CJFDTOTAL-QKKQ201911050.htm ZHANG J. The effect of zirconia on masticatory ability of dental prostheses and its application effect[J]. Electronic Journal of General Stomatology, 2019, 6(11): 71-72. https://www.cnki.com.cn/Article/CJFDTOTAL-QKKQ201911050.htm
[12]	祁兵, 何艳. 氧化锆全瓷冠修复体40例临床效果评价[J]. 上海口腔医学杂志, 2016, 25(3): 364-367. https://www.cnki.com.cn/Article/CJFDTOTAL-SHKY201603032.htm QI B, HE Y. Clinical evaluation of the zirconia all ceramic crowns in 40 consecutive patients[J]. Shanghai Journal of Stomatology, 2016, 25(3): 364-367. https://www.cnki.com.cn/Article/CJFDTOTAL-SHKY201603032.htm
[13]	马稔秋. 纤维桩树脂核与二氧化锆桩核修复牙体大面积缺损的临床对比研究[J]. 全科口腔医学电子杂志, 2019, 6(23): 27, 38. https://www.cnki.com.cn/Article/CJFDTOTAL-QKKQ201923013.htm MA N Q. Clinical comparison of resin core and zirconia post core in the restoration of large dental defects[J]. Electronic Journal of General Stomatology, 2019, 6(23): 27, 38. https://www.cnki.com.cn/Article/CJFDTOTAL-QKKQ201923013.htm
[14]	杨帆, 路晓淼, 刘芳, 等. 不同粘结剂对纤维桩粘结强度及其持久性的影响[J]. 中华全科医学, 2021, 19(7): 1111-1113, 1209. doi: 10.16766/j.cnki.issn.1674-4152.001997 YANG F, LU X M, LIU F, et al. Effect of different binders on bond strength and durability of fibre post[J]. Chinese Journal of General Practice, 2021, 19(7): 1111-1113, 1209. doi: 10.16766/j.cnki.issn.1674-4152.001997
[15]	ALEX G. Universal adhesives: The next evolution in adhesive dentistry?[J]. Compend Contin Educ Dent, 2015, 36(1): 15-26.
[16]	LOPES G R S, RAMOS N C, GRANGEIRO M T V, et al. Adhesion between zirconia and resin cement: A critical evaluation of testing methodologies[J]. J Mech Behav Biomed Mater, 2021, 120(8): 1-6.
[17]	XIE H F, TAY F R, ZHANG F M, et al. Coupling of 10-methacryloyloxy decyldihydrogen phosphate to tetragonal zirconia: Effect of pH reaction conditions on coordinate bonding[J]. Dent Mater, 2015, 31(10): e218-e225. doi: 10.1016/j.dental.2015.06.014
[18]	姚瑶, 陈月靖, 罗傲翔. 不同树脂水门汀对氧化锆陶瓷修复体粘接强度的影响[J]. 临床口腔医学杂志, 2020, 36(10): 594-597. https://www.cnki.com.cn/Article/CJFDTOTAL-LCKY202010008.htm YAO Y, CHEN Y J, LUO A X. Effect of different resin cements on bonding properties of zirconia ceramic restorations[J]. Journal of Clinical Stomatology, 2020, 36(10): 594-597. https://www.cnki.com.cn/Article/CJFDTOTAL-LCKY202010008.htm
[19]	杨路, 陈冰卓, 陈晨, 等. 一种自粘接树脂水门汀与氧化锆陶瓷粘接的耐久性评价[J]. 口腔医学, 2019, 39(5): 390-394. https://www.cnki.com.cn/Article/CJFDTOTAL-KQYX201905002.htm YANG L, CHEN B Z, CHEN C, et al. Durability evaluation of bonding between one type of self-adhesive resin cement and zirconia ceramics[J]. Stomatology, 2019, 39(5): 390-394. https://www.cnki.com.cn/Article/CJFDTOTAL-KQYX201905002.htm
[20]	李昶, 李旭, 王忠朝, 等. 3Shape TRIOS口内扫描制作氧化锆嵌体冠修复短冠磨牙的临床疗效观察[J]. 西南医科大学学报, 2018, 41(5): 407-410. https://www.cnki.com.cn/Article/CJFDTOTAL-LXYB201805004.htm LI C, LI X, WANG Z C, et al. Clinical effect of short coronal molar restoration with zirconia inlay-crowns manufactured based on 3Shape TRIOS intraoral scan[J]. Journal of Southwest Medical University, 2018, 41(5): 407-410. https://www.cnki.com.cn/Article/CJFDTOTAL-LXYB201805004.htm